Stenner Econ FP Series Light-Duty Pumps

PRODUCT DOCUMENTATION:

• Stenner Econ FP Series Pumps Specification
• Stenner Econ FP Series Pumps Manual

Stenner Econ FP Series pumps are perfect for light-duty applications such as drinking water disinfection or pH adjustment for private water wells in homes or farms. The Econ FP is a flow activated pump and can accept a dry contact signal or a 12-24 VAC/VDC signal from any control equipment that responds to flow. The functions are easy to program on the six button control pad with a backlit LCD window. Mounting the pump vertically is required for wet environments or outdoor use. The pumps run at a set time or a set speed according to the mode of operation selected. The control panel displays one of three operating modes, Seconds, Flow Switch and Auxiliary and the percent setting for each. The Stenner Econ FP Series Pumps are available in three flow rates; 4.5, 16.0 and 30 GPD.

FEATURES:

• Pump is field programmable to accept a dry contact signal or a 12-24 VAC/VDC input signal from any control equipment that responds to flow
• cULus for indoor/outdoor use
• 3-point roller design assists in anti-siphon protection
• Pump head requires no valves, allows for easy maintenance
• Self-priming against maximum working pressure, foot valve not required
• Pump does not lose prime or vapor lock
• Pumps off-gassing solutions and can run dry
• Output volume is not affected by back pressure
• Easy to change pump tube, lubrication is not required

SPECIFICATIONS:

• Part Number: E20PHF81S
• Pump Tube Number: F
• Flow Ratio: 4.5 GPD
• Voltage; 120V/60Hz
• Maximum Working Pressure: 80 psi (5.5 bar)
• Maximum Operating Temperature: 104°F (40°C)

• Part Number: E20PHG81S
• Pump Tube Number: G
• Flow Ratio: 16GPD
• Voltage 120V/60Hz
• Maximum Working Pressure: 80 psi (5.5 bar)
• Maximum Operating Temperature: 104°F (40°C)

• Part Number : E20PHH81S
• Pump Tube Number: H
• Flow Ratio: 30 GPD 
• Volatge : 120V/60Hz
• Maximum Working Pressure: 80 psi (2.5 bar) 
• Maximum Operating Temperature: 104°F (40°C)    

ACCESSORY KIT SHIPPED WITH EACH PUMP:

• 3 connecting nuts 1/4"
• 3 ferrules 1/4"
• 1 injection check valve
• 1 weighted suction line strainer 1/4"
• 1 20' roll suction/discharge tubing 1/4" white
• 1 additional pump tube
• 1 manual