John Guest
John Guest 3/8" Polyethylene Tubing (500 FT)
- SKU:
- PE-12-EI-0500F-B
- Condition:
- New
- Weight:
- 15.00 LBS
- Shipping:
- Calculated at Checkout
Description
John Guest Tubing is accepted by almost all the world’s beer and beverage producers and by the manufacturers of drinks dispenser equipment. John Guest products have quality and performance approvals from leading testing and acceptance authorities. John Guest LLDPE tubing is suitable for potable cold water applications with a maximum chlorine content of 4 parts per million (4 ppm). Heating water above 70ºF (20ºC) and or pressures above the maximum will significantly reduce service life. Direct exposure to sunlight will also significantly reduce its useful service. As part of good practice tubing should be inspected regularly. If there is any evidence of damage, hardening or cracking it should be replaced immediately.
SPECIFICATION
- Pipe Size: 3/8"
- Suitable for cold and intermittent hot water applications
- Odorless, tasteless, and non-toxic
- Broad chemical compatibility
- FDA and NSF certified
- Strong, flexible and robust
- Maximum working temperature 150ºF
- Maximum working pressure 230 psi
- Minimum working temperature 33ºF
PNEUMATICS APPLICATIONS
- John Guest LLDPE tube is suitable for pneumatic applications providing pressure is maximum 10 bar @ 20ºC (150psi @ 70ºF)
- At elevated temperatures(50ºC+) mineral oil will degrade LLDPE tube and, therefore, LLDPE tube used in pneumatic circuits should be periodically checked and replaced if necessary
EXPOSURE TO ULTRAVIOLET LIGHT
- Only black or blue tube should be installed in areas exposed to any light if biofilm growth is considered an issue
- Black tube is also UV stabilised and can be installed where exposed to direct sunlight (UV)
- In this case other colours must be protected from exposure to light
TUBE INSERTS
- If the tube is used in a warm water system a tube insert is necessary
For use with chemicals or other potentially aggressive liquids, please refer to John Guest Customer Services Department (001) 973 808 5600
Super Speedfit fittings and related products are not recommended for use with explosive gases, petroleum spirits, and other fuels or for central heating systems
Related Products


John Guest
John Guest 1/4" Polyethylene Tubing (500 FT)


John Guest
John Guest PE-12-EI-0500F-E 3/8" Polyethylene Tubing Black (500 FT)


John Guest
John Guest PE-12-EI-0500F-N 3/8" Polyethylene Tubing Natural (500 FT)


John Guest
John Guest PE-12-EI-0500F-R 3/8" Polyethylene Tubing Red (500 FT)


John Guest
John Guest PE-12-EI-0500F-W 3/8" Polyethylene Tubing White (500 FT)
Customers Also Viewed


John Guest
John Guest 1/4" Polyethylene Tubing (500 FT)

John Guest
John Guest 1/2" Polyethylene Tubing (250 FT)

John Guest
John Guest Locking Clip

John Guest
John Guest PI Series Bulkhead Union Connector`

John Guest
John Guest In Line Check Valve 1/4" Quick Connect (1/4SCV)


John Guest
John Guest PE-12-EI-0500F-E 3/8" Polyethylene Tubing Black (500 FT)

John Guest
John Guest CI Series Equal Tee Connector


John Guest
John Guest Polypropylene Angle Stop Adapter Valves

John Guest
John Guest CI Series Male Connector


John Guest